Einzelheiten zum Produkt
Herkunftsort: China
Markenname: Vanka
Zertifizierung: ISO9001:2015,CE
Zahlungs- und Versandbedingungen
Min Bestellmenge: 50 Sätze
Preis: $5-$10 Sets
Verpackung Informationen: 570x340x165
Lieferzeit: 30 Arbeitstage
Zahlungsbedingungen: L/C, T/T, Western Union, Moneygram
Versorgungsmaterial-Fähigkeit: 20000 Set/Sets pro Monat
Typ: |
Evakuierter Röhrchen, Teile des Sonnenwarmwasserbereiters, flacher Platte, Druck, andere |
Wohnmaterial: |
Edelstahl, Kunststoff, Kupfer, farbiger Stahl, verzinkter Stahl |
Installation: |
Freistehend, wand montiert, direkter Einsatz |
Umlaufart: |
Direkt- / offene Schleife (aktiv), andere |
Verbindungsart: |
Direktplug, geteilt, andere |
Kapazität: |
200.300.100 (L), 100L, 150 |
Druck: |
Unressurisiert, mittlerer Druck |
Anwendung: |
Wasserkocher, Heimnutzung, Bad/Küche/Wohnung/Krankenhaus/Schule/Fabrik, General, Wärmecontroller |
Heizsystem: |
Thermosyphon (passiv), Batch / ICs (passiv) |
Material: |
Kohlenstoffstahl, Borosilikatglas3.3, T2 rotes Kupfer, Kunststoff, ABS |
Farbe: |
blau, grün, wie du brauchst, silber, roh |
Verwendung: |
Solarwassertank und Vakuumrohr, Zubehör für Solarwarmwasserbereiter, Regierung, Wohnbetäle, Schwimmb |
Name: |
Flachplatten-Solarkollektor, Frostventil, kompakter nicht gepresster Solarwarmwasserbereiter, Solars |
Produktname: |
Hochwertiges Solarwarmwasserbereiterzubehör für Solarwarmwasserbereiter, Solarwarmwasserbereiter TK- |
Artikel: |
Solar Warmwasserbereiter Controller TK-7, Vakuumrohr Solarkollektor, heißer Verkauf energieeffizient |
Rahmen: |
45 Edelstahl, Edelstahl SUS201-1,2 mm/ verzinkter Stahl-1,5 mm, verzinkter Stahllegierung oder Edels |
Garantie: |
5 Jahre langlebiger Solaris-Solar-Warmwasserbereiter, 5 Jahre, 10 Jahre, 10 Jahre ohne von Menschen |
Innerer Tank: |
SUS304-2B Edelstahl, Edelstahl SUS304-0,5 mm |
Vakuumröhre: |
58 mm/1800 mm, QB-Al-N/AL-47-1500, Vakuumrohr 58*1800 oder 47*1500 |
Typ: |
Evakuierter Röhrchen, Teile des Sonnenwarmwasserbereiters, flacher Platte, Druck, andere |
Wohnmaterial: |
Edelstahl, Kunststoff, Kupfer, farbiger Stahl, verzinkter Stahl |
Installation: |
Freistehend, wand montiert, direkter Einsatz |
Umlaufart: |
Direkt- / offene Schleife (aktiv), andere |
Verbindungsart: |
Direktplug, geteilt, andere |
Kapazität: |
200.300.100 (L), 100L, 150 |
Druck: |
Unressurisiert, mittlerer Druck |
Anwendung: |
Wasserkocher, Heimnutzung, Bad/Küche/Wohnung/Krankenhaus/Schule/Fabrik, General, Wärmecontroller |
Heizsystem: |
Thermosyphon (passiv), Batch / ICs (passiv) |
Material: |
Kohlenstoffstahl, Borosilikatglas3.3, T2 rotes Kupfer, Kunststoff, ABS |
Farbe: |
blau, grün, wie du brauchst, silber, roh |
Verwendung: |
Solarwassertank und Vakuumrohr, Zubehör für Solarwarmwasserbereiter, Regierung, Wohnbetäle, Schwimmb |
Name: |
Flachplatten-Solarkollektor, Frostventil, kompakter nicht gepresster Solarwarmwasserbereiter, Solars |
Produktname: |
Hochwertiges Solarwarmwasserbereiterzubehör für Solarwarmwasserbereiter, Solarwarmwasserbereiter TK- |
Artikel: |
Solar Warmwasserbereiter Controller TK-7, Vakuumrohr Solarkollektor, heißer Verkauf energieeffizient |
Rahmen: |
45 Edelstahl, Edelstahl SUS201-1,2 mm/ verzinkter Stahl-1,5 mm, verzinkter Stahllegierung oder Edels |
Garantie: |
5 Jahre langlebiger Solaris-Solar-Warmwasserbereiter, 5 Jahre, 10 Jahre, 10 Jahre ohne von Menschen |
Innerer Tank: |
SUS304-2B Edelstahl, Edelstahl SUS304-0,5 mm |
Vakuumröhre: |
58 mm/1800 mm, QB-Al-N/AL-47-1500, Vakuumrohr 58*1800 oder 47*1500 |
High-energy 220V thermostatic pulse igniter designed for forced-exhaust gas water heaters. Features powerful pulse output and thermostat-compatible interface for fast, reliable ignition. Dual-pulse protection and multiple safety checks prolong service life and improve reliability. Easy to install and compatible with many forced-vent heater models.
Fast Ignition: High-energy pulse output ensures instant ignition with zero delay
Precise Control: Compatible with thermostat interface for accurate water temperature adjustment
High Success Rate: Dual pulse and dual safety ignition logic for more reliable ignition
Enhanced Safety: Multiple protections including flameout detection, over-voltage, and short-circuit protection
Easy Installation: Simple setup, compatible with various forced-exhaust gas water heaters
Item | Specification |
---|---|
Input Voltage | AC 220V ±10% |
Output Voltage | 12–15 kV (High-Voltage Pulse) |
Operating Frequency | 50/60 Hz |
Ignition Method | Pulse Ignition (Single/Dual Pulse Optional) |
Compatible Type | Forced-Exhaust Gas Water Heaters (Thermostatic/Standard) |
Protection Rating | IPX0 (Waterproof version optional) |
Operating Temperature | -10℃ ~ +60℃ |
Service Life (Typical) | ≥100,000 Ignitions (Depending on Use) |
Wiring | Input Wire, Ground, Thermostat Signal Wire, Ignition Output Wire |
Dimensions (Typical) | 60 x 41 x 29 mm (Example) |
Weight (Typical) | 100–120 g |
Q1: Which water heaters are compatible with this igniter?
A1: This module is specifically designed for forced-exhaust (fan-assisted) gas water heaters. It is compatible with most 220V-powered models that have thermostat/temperature control interfaces. For exact compatibility, please provide the wiring diagram or the heater model number.
Q2: Does installation require a technician?
A2: If you have basic electrical and gas appliance safety knowledge, you can replace the wiring according to the manual. If not, it is strongly recommended to have a professional technician perform the installation to ensure safety.
Q3: What should I do if ignition fails?
A3: First, check whether the power supply, grounding, and gas source are normal, and whether the spark electrode gap (recommended 8–12 mm) is correct. If the issue persists, replace the ignition module or contact after-sales support.
Q4: Is there a waterproof version available?
A4: Yes, some models are available with waterproof or moisture-resistant treatment. If the product will be exposed to humid environments, it is recommended to choose a waterproof version.
Q5: What is the warranty period?
A5: The standard warranty is 12 months (depending on supplier). Please note that non-original modifications or damage caused by human error are usually not covered under warranty.